LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumper -- 718 SPYDER >> WM, 631019 Removing And Installing Front Bumper >> Removing And Installing Front Bumper

Removing And Installing Front Bumper

  1. Unscrew screws -2-  and remove front bumper -1-  .
    G16223688Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front bumper

  2. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw on front bumper: > Tightening torque 23 N.m (17 ft lb.) +/- 2 N.m (1.5 ft lb.) 

scientia non olet · About LEMON Manuals