LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers - 718 SPYDER >> WM, 635719 Removing And Installing Rear Retaining Strip >> Installing Rear Retaining Strip

Installing Rear Retaining Strip

  1. Fit rear retaining strip -2-  and slide it up -A-  until the retaining strip is touching the side panel.
    G14395607Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing rear retaining strip

    PART DESCRIPTION 

    1  Fastening screws
    2  Rear retaining strip
  2. Screw in and tighten fastening screws -1-  to > Tightening torque 7 (5 ftlb.) Nm + 0.7 (0.4 ftlb.) Nm - 1 (0.5 ftlb.) Nm  .
scientia non olet · About LEMON Manuals