LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers - 718 SPYDER >> WM, 635619 Removing And Installing Rear Panel (Logo) >> Installing Rear Panel (Logo)

Installing Rear Panel (Logo)

  1. Clip in cover.
  2. Clip in rear panel (logo).
  3. Tighten fastening screws on the rear panel (logo) -1-  to > Tightening torque 2.4 (2 ftlb.) Nm + 10 % +/- 15 %  .
    G14395602Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening screws

  4. Tighten fastening screws on the cover -2-  to > Tightening torque 2.4 (2 ftlb.) Nm + 10 % - 15 %  .
    G14395603Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening screws

scientia non olet · About LEMON Manuals