Removing Rear Apron
Installation position of rear apron
- Disconnect wiring harness for ParkAssist -1-
.
Plug connection for ParkAssist
- 1.1 Unclip plug connection for ParkAssist.
- 1.2 Release and disconnect plug connection for ParkAssist.
- Disconnect wiring harness for reversing camera -1-
.
Plug connection for reversing camera
- 2.1 Unclip plug connection for reversing camera.
- 2.2 Release and disconnect plug connection for reversing camera.
- Unscrew fastening screws at the bottom -1-
.
Bottom fastening screws
- Unscrew lower fastening screws at the centre -1-
.
Lower fastening screws at the centre
- Unscrew fastening screws in wheel housing -1-
.
Fastening screws in wheel housing
- Unscrew fastening screws at the top -1-
and remove rear apron -arrow-
.
Fastening screws at the top