Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Align the sealing surface and connections of the body.
2. De-burr connection points and prepare them for welding.
3. Prepare the marked areas for joining.

   > 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing body connection areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing body connection areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing body connection areas

WELDING SPECIFICATION