LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - 718 SPYDER >> WM, 534855 Replacing Rear Side Member >> Preparing Connection Areas Of Body For Installing Rear Side Member

Preparing Connection Areas Of Body For Installing Rear Side Member

  1. Fit in rear side member and secure it to the body. Check gap dimensions.

    > 5X00IN DIAGRAM - BODY GAP DIMENSIONS

    Position rear side member using the straightening system.

    1. 1.1  Drill bores for the rivets through the existing holes. > Diameter 6.5 mm 
      G14395119Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Drilling holes

      G14395120Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Drilling holes

    2. 1.2  Countersink bore -1-  for installing a countersunk rivet.
  2. Prepare connection areas on the body for bonding.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

scientia non olet · About LEMON Manuals