Removing Rear Trunk Floor Panel

Fig 1: Rear Boot Floor Plate Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of rear trunk floor panel

1. Drill through punch rivets -B-  using a > Nr.201 - twist drill. 
   1. 1.1  Unscrew and remove Torx screws in area -A-  .
   2. 1.2  Heat bonding areas. > V.A.G 1416 - Hot-Air Blower 
   3. 1.3  Remove rear trunk floor panel.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing rear trunk floor panel