Removing And Installing Cover For Centre Underbody

Information 

The centre underbody cover can only be removed if the centre underbody covers at the side are removed.

1. Unscrew and remove screws -2-  .
2. Unscrew nuts -3-  and remove centre underbody cover -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing cover for centre underbody

3. Installation is performed in reverse order. Pay particular attention to the following:

   Tightening torque for nut on centre underbody cover: > Tightening torque 2.7 (1.75 ftlb.) Nm +/- 0.2 (0.1 ftlb.) Nm 

   Tightening torque for screw on centre underbody cover: > Tightening torque 2.7 (1.75 ftlb.) Nm +/- 0.2 (0.1 ftlb.) Nm