Removing And Installing Cover For Front Underbody

Unscrew nuts -3- .
Unscrew screws -2- and remove cover for front underbody -1- .

Fig 1: Cover For Front Underbody Component Location
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing cover for front underbody
Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for screw securing front underbody cover: > Tightening torque 2.7 (1.75 ftlb.) Nm +/- 0.2 (0.1 ftlb.) Nm

Tightening torque for nut securing front underbody cover: > Tightening torque 2.7 (1.75 ftlb.) Nm +/- 0.2 (0.1 ftlb.) Nm