Installing Seat Cross Member

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

Information 

• Position the seat cross members with the seat installed. 

1. Install the seat cross members and check that they fit perfectly. Check gap dimensions.

   > 5X00IN41 GAP DIMENSIONS - "Installing" section

2. Apply adhesive. > Application depth 3.0 mm 

   Working with body structural adhesive

   > 5X00IN41 GAP DIMENSIONS - "Installing" section

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

3. Rivet-in the seat cross members. > BLIND RIVET 999.190.227.01 
   1. 3.1  Rivet in area -A-  . > BLIND RIVET 999.190.230.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing seat cross member