Installing FLOORPAN

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Apply adhesive. > Application depth 3.0 mm 

   Working with body structural adhesive

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE - section on "Installing"

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

2. Rivet in floorpan.
   1. 2.1  Rivet in area -A;C-  . > BLIND RIVET 999.190.227.01 
   2. 2.2  Rivet in area -B-  . > BLIND RIVET 999.190.229.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing floorpan

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing floorpan

3. Apply adhesive.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

4. Install firewall section.
   1. 4.1  Rivet in area -A;C-  . > BLIND RIVET 999.190.229.01 
   2. 4.2  Rivet in area -B-  . > BLIND RIVET 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing lower firewall section

5. Install connection bracket.
   1. 5.1  Apply adhesive.
   2. 5.2  Rivet in area -A-  . > BLIND RIVET 999.190.229.01 
   3. 5.3  Screw in flow drill screws in area -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing connection bracket