Replacing Holder For Dashboard Bracket

Information 

Screws -1-  remain in holder for dashboard bracket.

1. Remove holder for dashboard bracket.
   1. 1.1  Loosen screws -1-  .¹⁾
   2. 1.2  Remove holder for dashboard bracket with screws -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing holder for dashboard bracket

   ¹⁾ Loosen screws gradually in alternating sequence to prevent tilting.

2. Install new holder for dashboard bracket.
   1. 2.1  Position holder for dashboard bracket with existing screws -1-  in installation position.
   2. 2.2  Screw in and tighten screws -1-  . > Tightening torque 23 (17 ftlb.) Nm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing holder for dashboard bracket