LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 51 - Body Center, Roof, Frame - 718 SPYDER >> WM, 510123 Installing (Lower) Seat-Belt Connection Reinforcement >> Installing New Threaded Bolt

Installing New Threaded Bolt

  1. Measure and mark the installation position of the new threaded bolt -2-  in accordance with dimension -X-  and dimension -Y-  . > Length 20 mm  > Length 15 mm 
    Fig 1: Checking Threaded Bolt Measurement Dimension
    G14381963Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Marking installation position

  2. Tighten new threaded bolt at the previously marked installation position.
scientia non olet · About LEMON Manuals