Removing And Installing Cowl Panel Cover

Information 

To align the cowl panel cover at the sides, guide the centring pin -1-  into the centring cut-out -2-  .

Fig 1: Cowl Panel Cove Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Centring cowl panel cover

1. Lever the cowl panel cover up off the piping profile using a plastic wedge -arrow-  and remove it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Unclipping cowl panel cover

2. Installation is performed in reverse order.