Removing And Installing Battery Console

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

1. Unscrew and remove screws -2-  on battery console -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Detaching battery console

2. Carefully lift the battery console and turn it around until the electric plug connection -2-  is accessible.
3. Disconnect electric plug connection -2-  on the fuel pump control unit -1-  .
4. Remove battery console with fuel pump control unit -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing battery console

5. Installation is performed in reverse order. Pay particular attention to the following:

   Tightening torque for screw on battery console: > Tightening torque 23 (17 ftlb.) Nm