WM, 507955 Replacing Front Side Member (Section): Notes
Parts
PART NUMBER DESCRIPTION
| Part number | Description | Addition | Quantity |
|---|---|---|---|
| > N10760801 | RIVET SCREW N107 608 01 | 1 | |
| > 99907354901 | countersunk screw 999.073.549.01 | 7 | |
| > 99919022701 | BLIND RIVET 999.190.227.01 | ||
| > 99919023001 | BLIND RIVET 999.190.230.01 | ||
| > 99919023001 | BLIND RIVET 999.190.230.01 | ||
| > 99919022901 | BLIND RIVET 999.190.229.01 | ||
| > 99919022901 | BLIND RIVET 999.190.229.01 |
Tools
TOOL DESCRIPTION
| Tool denomination | Type | Tool number | Image |
|---|---|---|---|
| twist drill | Commercially available tool | > Nr.201 | |
| Hot-Air Blower | General workshop equipment | > V.A.G 1416 |
Technical values
TECHNICAL VALUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Side member connection point | Large cut | Length | 180 mm | ||
| Connection point for longitudinal member | Dimension X | Length | 125 mm | ||
| Side member connection point | Outer shell only | Length | 100 mm | ||
| Drill bit | Diameter | 9 mm | |||
| Drill bit | Diameter | 9 mm | |||
| Drill bit | Diameter | 6.5 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Bead of adhesive | Application depth | 5 mm | |||
| Threaded joint on side member | Tightening torque | 15 (11 ftlb.) Nm |