Preparing Longitudinal Member For Wheel Housing

Check gap dimensions.

> 5X00IN DIAGRAM - BODY GAP DIMENSIONS

1. 1.1  Drill holes for rivets through the existing holes using a drill bit with a diameter of > Diameter 6.6 mm  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outer upper longitudinal member

Check gap dimensions.

> 5X00IN DIAGRAM - BODY GAP DIMENSIONS

1. 2.1  Drill holes for rivets through the existing holes using a drill bit with a diameter of > Diameter 6.6 mm  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Upper longitudinal member