LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Rear - 718 SPYDER >> WM, 505619 Removing And Installing Front Wheel Housing Liner >> Removing And Installing Front Wheel Housing Liner >> Removing And Installing Front Wheel Housing Liner - Front Part

Removing And Installing Front Wheel Housing Liner - Front Part

  1. Unscrew and remove screws -2-  .
  2. Remove front wheel housing liner - front part -1-  .
    G14381643Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing front wheel housing liner - front part

  3. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw on front wheel housing liner - front part: > Tightening torque 3 (2 ftlb.) Nm 

scientia non olet · About LEMON Manuals