Removing And Installing Front Wing

Remove expansion rivets -1- and remove masking panel -2- from the front wing -3- .

Fig 1: Front Wing Component Location
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing masking panel
Unclip line bracket -4- from the front wing -1- and move electric wire harnesses aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening electric wire harnesses
Unscrew nuts -5- .
Unscrew and remove screw -6- .
Remove expanding clip -7- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening front wing at the A-pillar
Unscrew and remove screws -8- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening front wing at the top
Unscrew nuts -9- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening front wing at the bottom
Unscrew screw -10- and remove front wing -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front wing
Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for nut on front wing: > Tightening torque 10 (7.5 ftlb.) Nm
Tightening torque for screw on front wing: > Tightening torque 10 (7.5 ftlb.) Nm