LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Rear - 718 SPYDER >> WM, 505355 Replacing Wing Joining Plate >> Preparing Front Wing Joining Plate For Installation

Preparing Front Wing Joining Plate For Installation

  1. Fit wing joining plate and secure it to the body.
    1. 1.1  Drill bores for the rivets through the existing holes. > Diameter 6.5 mm 
  2. Remove wing joining plate.
  3. Countersink bores for installing countersunk rivets. > Nr.202 - Countersink 
  4. Prepare connection areas for bonding.
    G14381626Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing connection areas for bonding

scientia non olet · About LEMON Manuals