Removing Front Panel

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

Fig 1: Front Panel Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front panel

1. Remove wing joining plate.

   >505355 REPLACING WING JOINING PLATE 

2. Drill through punch rivets using a > Nr.201 - twist drill. 

   Grind down welded seams.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front panel

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front panel

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front panel

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front panel

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Grinding off welded seam

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front panel

3. heat bonding areas. > V.A.G 1416 - Hot-air blower 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening bonding areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening bonding areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening bonding areas

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening bonding areas

4. Remove front panel.