Preparing Connection Areas Of Body For Installing Front Panel

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. De-burr the bores.
2. Prepare connection areas for bonding.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing connection areas for bonding

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing connection areas for bonding