LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Rear - 718 SPYDER >> WM, 501055 Replacing Front Closing Panel >> Preparing Front Closing Panel For Installation

Preparing Front Closing Panel For Installation

  1. Fit closing panel and secure it to the body.
    1. 1.1  Drill bores for the rivets through the existing holes. > diameter 6.6 mm 
  2. Remove closing panel.
  3. Countersink bores for installing countersunk rivets. > Nr.202 - Countersink 
  4. Prepare connection areas for bonding.
    G14381460Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing closing panel for installation

scientia non olet · About LEMON Manuals