LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 Seat Frames -- 718 SPYDER >> WM, 722955 Replacing Retainer Plate For Seat-Adjustment Motor >> Preliminary Work

Preliminary Work

WARNING: Incorrect information for the AWS control unit 
  • Passenger's airbag is triggered incorrectly 

    → Calibrate the AWS control unit if the passenger's seat was removed and re-installed, or if the seat bracket or AWS control unit was replaced.

    → Do not loosen the safety screws on the AWS sensors or seat frame.

    → Only replace retainer plate for seat adjustment motor on vehicles without AWS sensors.

    → Always replace the retainer plate together with the seat frame on vehicles with an AWS sensor.

  1. Move front seat to its highest position.

    1) To guarantee maximum possible access to drive shafts for seat adjustment motor.

  2. Remove trim panel for seat.

    > 721619 REMOVING AND INSTALLING TRIM PANEL FOR SEAT 

  3. Remove seat-adjustment motor.

    > 728719 REMOVING AND INSTALLING SEAT-ADJUSTMENT MOTOR