Removing BOWDEN Cable For Backrest Release

1. Release backrest and fold forwards.
2. Disengage tension spring -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing backrest frame release

3. Press out lock washers -2-  and remove backrest frame release -3-  (-arrow-  ).
4. Unclip retaining lug -1-  from the backrest frame -2-  (-arrow -  ).

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disengaging bowden cable downwards

5. Turn eye -3-  of bowden cable -2-  90° -arrow-  and pull it out of the locking lever.
6. Swivel pin -1-  of bowden cable up by 90° -arrows-  and disengage bowden cable.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disengaging bowden cable upwards

7. Press locking lug -1-  on the clip in slightly and remove it by pulling it down out of the backrest frame -arrow-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disengaging bowden cable

8. Unclip bowden cable from retaining lug -1-  and remove it by pulling it up out of the backrest frame -arrow-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing bowden cable