LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 Seat Frames -- 718 SPYDER >> WM, 721955 Replacing Backrest Frame >> Disassembling Backrest Frame >> Disconnecting Wire Harness On Backrest Frame

Disconnecting Wire Harness On Backrest Frame

  1. Loosen clips -1-  for wire harness on the back of the lower backrest frame -2-  .
    G16224555Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening clip

  2. Remove section of side airbag line -1-  from the clips -2-  .
    G16224556Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing lower section of side airbag line

  3. Unclip line brackets -1 and 2-  and disconnect section of side airbag line -3-  .
    G16224557Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting upper section of side airbag line

  4. Disconnect electric plug connection -1-  .
    G16224558Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting electric plug connection for backrest adjustment

  5. Release clips from wire harness on backrest frame -arrow-  .
    G16224559Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing wire harness on backrest frame

    Information 

    Do not trap or damage the wire harness when pulling it through.

  6. Guide wire harness down and out -arrows-  .
G16224560Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling out wire harness