Disassembling Spring Damper
WARNING: This page is about a different variant/trim than selected.
- Remove the -1-
shock absorber mounting.
- 1.1 Unscrew -2-
nut using > T10001 - the shock absorber set
while at the same time holding back the multiple-tooth screw of the piston rod -3-
.
- 1.2 Remove shock absorber mount -1-
from piston rod -3-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Shock absorber mounting
- Pull supporting washer -1-
from piston rod -2-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Support washer
- Remove stop buffer -1-
and protective sleeve -2-
.
- 3.1 Pull stop buffer -1-
with protective sleeve -2-
from the piston rod.
- 3.2 Pull stop buffer -1-
from protective sleeve -2-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Stop buffer and protective sleeve