Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Steering column to retaining frame | Hexagon nut, M8 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Steering column to steering column Centre (universal joint) | Hexagon roundhead bolt, M8 x 30/always replace bolt following removal! | Initial tightening | 20 Nm (15 ftlb.) | ||
| Steering column to steering column Centre (universal joint) | Hexagon roundhead bolt, M8 x 30/always replace bolt following removal! | Final tightening torque angle | + 90° |