Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Fastening screw securing holder to catalytic converter | M8 x 20 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening nuts securing primary catalytic converter to catalytic converter | M8/replace | Tightening torque | 23 Nm (17 ftlb.) | ||
| Ball clamp securing exhaust system to catalytic converter | Tightening torque | 35 Nm (26 ftlb.) |