Installing Heat Shield On Centre Tunnel
WARNING: This page is about a different variant/trim than selected.
- Install heat shield on centre tunnel.
- 1.1 Move heat shield for centre tunnel -3 to 5-
into installation position.
- 1.2 Fit and tighten nuts -1-
and screws -2-
.
Nuts -1-
> Tightening torque 2.5 Nm (1.75 ftlb.)
Screws -2-
> Tightening torque 2.5 Nm (1.75 ftlb.)
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Heat shields on centre tunnel