LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Panamera 4S Executive >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 55 (28 Ignition System, PREGLOW System 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 283919 Remove And Install Camshaft Sensor (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Only for camshaft sensors for intake camshaft:

    Remove > 9866 - support  and install torque support.

    > 103719 REMOVE AND INSTALL TORQUE SUPPORT

  2. Additionally for camshaft sensor for intake camshaft on cylinder bank 1:

    Install front trim panel (engine compartment) at the right.

    > 700219 REMOVE AND INSTALL THE FRONT TRIM PANEL

  3. Installing engine cover (design cover).

    > 108319 REMOVE AND INSTALL ENGINE COVER (DESIGN COVER) (V8 BITURBO)

scientia non olet · About LEMON Manuals