Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screws on bracket for all-wheel final drive | M10 x 32 | Tightening torque | 54 Nm (40 ftlb.) | ||
| Screws for all-wheel final drive | M10 x 70 | Tightening torque | 54 Nm (40 ftlb.) | ||
| Fastening screws securing engine carrier to engine | M10 x 45/replace | Initial tightening | 50 Nm (37 ftlb.) | ||
| Fastening screws securing engine carrier to engine | M10 x 45/replace | Final tightening | + 90° | ||
| Fastening screws securing engine mount to bracket | M10 x 45 | Tightening torque | 55 Nm (41 ftlb.) |