Installing Sealing Ring For CARDAN Flange

1. On the new cardan flange sealing ring, fill the space between the dust lip and sealing lip -arrow-  with grease.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing sealing ring

2. Tap new  cardan flange sealing ring in as far as it will go using > 9812 - pressure piece  .
3. Tap new  dust boot in carefully using > 9332 - pressure piece  .
4. Install new  circlip -1-  on input flange on all-wheel final drive and coat input flange on all-wheel final drive with a light coating of Anti Seize. 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing circlip on input flange on all-wheel final drive