Removing Cover For Rear Lock Support
WARNING: This page is about a different variant/trim than selected.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Installation position of cover for rear lock support
- Detach seal -2-
in the rear lock support cover area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Seal
2 Unscrew and remove screws -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Screws
- Unclip cover on rear lock support using a plastic spatula.
- Remove cover for rear lock support.