Removing ATF Cooler
WARNING: This page is about a different variant/trim than selected.
WARNING:
Hot fluid
- Danger of scalding
→ Let the fluid cool down.
→ Wear personal protective gear.
- Place a drip pan underneath to collect emerging oil.
- Unscrew screw -2-
and disconnect ATF lines -3-
at the thermostat.
Unscrewing screw
- Unscrew screw -4-
on radiator assembly.
Unscrewing screw on radiator assembly
- Unclip ATF cooler -1-
(-arrows-
).
Unclipping ATF cooler
- Swivel out ATF cooler -1-
(-arrow-
) and remove it.
Removing ATF cooler