Belt Drive
WARNING: This page is about a different variant/trim than selected.
Overview of belt drive
| 1 | Belt for generator |
| 2 | Belt tensioner (air-conditioning compressor) |
| 3 | Magnetic clutch for air-conditioning compressor |
| 4 | Deflection roller for air-conditioning compressor |
| 5 | Belt for air-conditioning compressor |
| 6 | Vibration damper |
| 7 | Belt tensioner (generator) |
| 8 | Generator free wheel lock |
| 9 | Deflection roller for generator |
| 10 | Water pump pulley |
Belt drive
| 1 | Belt for generator |
| 2 | Belt for air-conditioning compressor |
| 3 | Deflection roller for air-conditioning compressor |
| 4 | Screw, M8 x 37/replace > Tightening torque 25 Nm (19 ftlb.) |
| 5 | Belt tensioner (air-conditioning compressor) |
| 6 | Screw, M8 x 33 > Tightening torque 25 Nm (19 ftlb.) |
| 7 | Belt tensioner (generator) |
| 8 | Screw, M8 x 25/replace > Initial tightening 8 Nm (6 ftlb.) > Final tightening + 45° |
| 9 | Deflection roller for generator |
| 10 | Screw, M8 x 16.9 x 65 x 50 > Tightening torque 25 Nm (19 ftlb.) |
| 11 | Vibration damper |
| 12 | Screw, M16 x 1.5 x 75/replace > Initial tightening 150 Nm (111 ftlb.) > Final tightening 90° |
| not shown: | M6 screw, pulley to coolant pump > Tightening torque 10 Nm (7.5 ftlb.) |