LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Panamera 4S Executive >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Collision*** 5X Body - General - Wagon -- 971 - PANAMERA (971)) >> 5X Body - General >> WM, 5X00IN04 Body Parts Of Various Sheet-Steel Strengths >> Straightening Body Parts

Straightening Body Parts

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Only "Original Porsche parts" or sections of "Original Porsche parts" may be used!

The body and floor assembly are made from deep-drawn panels as standard. For this reason, accident damage must be reshaped in the same way. Body repairs can no longer be performed by reshaping if these body parts are deformed. In this case, the body parts must be repaired using new parts or by means of sectional repairs. The separation of damaged body parts after reshaping against the accident direction should not take place until after connection pieces have been straightened.