Installing Catalytic Converter

1. 1.1 Fit new seal on the three-hole flange.
2. 1.2 Carefully insert catalytic converter -4-  at the relevant side.
3. 1.3 Fit and tighten screw -1-  .

   > Tightening torque 23 Nm (17 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Catalytic converters with brackets (similar to illustration)

> Tightening torque 35 Nm (26 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Ball clamps

1. 3.1 Fit and tighten nuts -1-  .

   > Tightening torque 23 Nm (17 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Catalytic converter flange