Removing TV Tuner
NOTE:
Incorrect handling of optical waveguides
- Risk of damage to optical waveguide
→ Observe the requirements for working with and installing optical waveguides.
NOTE:
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.
- Switch off ignition and remove remote control (hand-held transmitter).
- Unscrew screws -2-
and set bracket aside with the lines connected -3-
.
Removing bracket
Information
The number of electric plug connections will vary depending on equipment.
- Release and disconnect electric plug connections -4-
.
Releasing and pulling off electric plug connections
- Guide in special tool > 9570/1 - Disassembly tool
on the TV tuner -1-
at the left and right -arrows-
and remove TV tuner -1-
by pulling it forward.
Removing TV tuner