LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (15 Engine - Cylinder Head, Valve Drive 3.0L -- 95B - MACAN (95B)) >> WM, 153919 - Removing And Installing Camshaft Controller Actuator (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install front strut.

    > 408619 - REMOVE AND INSTALL FRONT STRUT

  2. Install heat shield.

    > 261219 - REMOVING AND INSTALLING HEAT SHIELD (V6 TURBO)

  3. Only after removing camshaft controller actuator on intake side of cylinder bank 1: 

    Fill up coolant.

    > 193817 - DRAINING AND FILLING COOLANT

scientia non olet · About LEMON Manuals