LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (42 Rear Wheel Suspension Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 429119 Removing And Installing Connecting Link For Anti-Roll Bar >> Removing Connecting Link For Anti-Roll Bar

Removing Connecting Link For Anti-Roll Bar

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove connecting link for anti-roll bar -1-  .
    G15156100Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connecting link for anti-roll bar

    1. 1.1 Unscrew screw securing connecting link for anti-roll bar to lower trailing arm -2-  .
    2. 1.2 Unscrew screws securing connecting link for anti-roll bar to anti-roll bar -3-  and counter at nut -4-  .
    3. 1.3 Remove connecting link for anti-roll bar -1-  .
scientia non olet · About LEMON Manuals