Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link to lower trailing arm | M10 x 65 thread/always use new screws or bolts following removal | Initial tightening | 50 Nm (37 ftlb.) | ||
| Connecting link to lower trailing arm | M10 x 65 thread/always use new screws or bolts following removal | Final tightening | + 90° | ||
| Lower trailing arm to rear axle housing | M12 thread/always use new screws or bolts and nuts following removal | Initial tightening | 70 Nm | ||
| Lower trailing arm to rear axle housing | M12 thread/always use new screws or bolts and nuts following removal | Final tightening | + 180° | ||
| Lower trailing arm to wheel bearing housing | M14 thread/always use new screws or bolts and nuts following removal | Initial tightening | 120 Nm | ||
| Lower trailing arm to wheel bearing housing | M14 thread/always use new screws or bolts and nuts following removal | Final tightening | + 360° | ||
| Level sensor to lower trailing arm | M6 x 16 thread | Tightening torque | 9 Nm |