Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Tie rod to rear axle housing | M12 thread/always use new screws or bolts and nuts following removal | Tightening torque | 95 Nm | ||
| Tie rod to wheel bearing housing | M12 x 1.5 x 80.8 thread/always use new screws or bolts following removal | Initial tightening | 90 Nm | ||
| Tie rod to wheel bearing housing | M12 x 1.5 x 80.8 thread/always use new screws or bolts following removal | Final tightening | + 90° |