Pressure And Intake Pipes (V6 Biturbo)
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Overview of intake pipes (V6 biturbo)
| 1 | Intake pipes |
| 2 | Intake pipe seals |
| 3 | Positive crankcase ventilation hose |
| 4 | > Tightening - torque 9 Nm (6.6 ftlb.) |
| 5 | > Tightening - torque 4 Nm (3 ftlb.) |
| 6 | Connecting piece for air cleaner housing |
| 7 | Screw-type clamp on connecting piece for air cleaner housing |
| 8 | Connecting piece for intake pipes |
Overview of pressure pipes (V6 biturbo)
| 1 | Pressure pipe seals |
| 2 | Pressure sensors |
| 3 | > Tightening - torque 5.5 Nm (4.1 ftlb.) |
| 4 | > Tightening - torque 9 Nm (6.6 ftlb.) |
| 5 | > Tightening - torque 5.5 Nm (4.1 ftlb.) |
| 6 | > Tightening - torque 8 Nm (5.9 ftlb.) |
| 7 | > Tightening - torque 5.5 Nm (4.1 ftlb.) |
| 8 | Pressure pipe at the side |
| 9 | Pressure pipe, top |
| 10 | Screw-type clamps securing pressure hose to charge-air cooler pipe adapter |
| 11 | Screws on pipe adapter for charge-air cooler > Tightening - torque 3.5 Nm (2.6 ftlb.) |
| 12 | Pipe connection on charge-air cooler/assembly instructions: Mixture of 50% water and 50% "Kluberplus" permitted as sliding compound for fitting support on charge-air cooler |