Fuel System

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel System Component Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of fuel system

1	High-pressure pump
2	Supply line - section at high-pressure pump
3	Union nut
4	Fuel pressure sensor
5	Supply line - engine compartment section
6	Spring band clamp
7	Plug-in coupling
8	Supply line - underbody section
9	Fuel tank
10	Retaining straps for fuel tank
11	Stud
12	> Tightening - torque 20 Nm (15 ftlb.)
13	> Tightening - torque 20 Nm (15 ftlb.)
14	> Tightening - torque 15 Nm (11 ftlb.)
15	Filler neck cap Tightening torque 20 Nm (15 ftlb.) Tightening torque 8 Nm (6 ftlb.) Tightening torque 110 Nm (81.5 ftlb.)

Location	Description	Type	Basic value	Tolerance
Screws securing stone guard to body	Item 2	Tightening torque	20 Nm (15 ftlb.)

Fig 2: Fuel Tank To Body Component Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fuel tank to body

2	Screws > Tightening - torque 20 Nm (15 ftlb.)

Fig 3: Heat Protection For Fuel Tank Component Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat protection for fuel tank

1	Screws > Tightening - torque 4 Nm (3 ftlb.)

Fig 4: Heat Shield Component Location With Torque Specification - Centre Rear And Right

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat shield, centre rear and right

1	Nuts > Tightening - torque 20 Nm (15 ftlb.)