Specifications When Handling Oxygen Sensors
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTIFICATION
Incorrect handling of oxygen sensors
- Damage to oxygen sensors
- Different exhaust emission behaviour
- → Do not remove the plastic cap on the thread until just prior to fitting.
- → Protect oxygen sensors from impact of any kind.
- → Do not kink or twist the cables when screwing in the sensors.
- → Do not re-use dirty or damaged components.
NOTIFICATION
Incorrect line routing
- Risk of damage to lines and hoses
- Malfunction and fault memory entry on control unit
- → Avoid small bending radii when routing lines.
- → File down edges and burrs in the routing area of mask them with adhesive tape.
- → Maintain a sufficient distance from components exposed to high temperatures while driving.