Installing Control Unit For Fuel Pump

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work.
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
Do not touch electric pins and plug contacts.

Installation is performed in reverse order. Pay particular attention to the following:
Tighten fastening nuts -1- to > Tightening - torque 8 Nm (6 ftlb.) .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Control unit for fuel pump