Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screws on protective plate for supply line section on underbody | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw on line bracket for supply line section on underbody | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw on line bracket for supply line section in engine compartment | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw on line bracket for supply line section at high-pressure pump | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Nuts securing line bracket for supply line section at high-pressure pump | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Union nut for fuel line | Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. | tightening torque of | 10 Nm (7.4 ftlb.) |