Removing Supply Line - Underbody Section

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Highly inflammable or explosive materials

Danger of fire or explosion
1. → Avoid contact with hot parts or sources of ignition.
2. → Use suction to remove ignitable vapours.
3. → Attach warning sign in a clearly visible position.
4. → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
5. → Secure collection containers/vessels to prevent them from tipping over.

WARNING: Toxic substances

Danger of poisoning or suffocation
Danger of burns to the eyes and skin
1. → Ventilate the work area well.
2. → Never ingest or inhale.
3. → Read specific information on the Hazard Sheet.
4. → Wear personal protective gear.
5. → Do not smoke, eat or drink in the work area.

Disconnect underbody section -1- from engine compartment section -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Underbody section to engine compartment section
1. 1.1 Release and disconnect quick connector -3- on engine compartment section -2- .
2. 1.2 Soak up escaping fuel using suitable aids and close off line connections using suitable stoppers.
3. 1.3 Unscrew screw on line bracket -4- and open line bracket -5- .
4. 1.4 Disengage underbody section -1- from line bracket -5- .
Disconnect underbody section -1- from fuel tank section -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Underbody section on fuel tank section
1. 2.1 Release and disconnect quick connector -3- on fuel tank section -2- .
2. 2.2 Soak up escaping fuel using suitable aids and close off line connections using suitable stoppers.
3. 2.3 Open line bracket -4- and disengage underbody section -1- from line bracket -4- .
Disconnect supply line -1- in the wheel housing.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Supply line in front wheel housing
1. 3.1 Unscrew screws -2- and remove protective plate -3- .
2. 3.2 Open line bracket -4- and disengage supply line -1- from line bracket -4- .
Loosen supply line -1- from line guide -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Line guide
1. 4.1 Unclip clips on line guide -2- .
2. 4.2 Open line guide -3- .
3. 4.3 Open line bracket -4- .
4. 4.4 Disengage supply line -1- from line bracket -4- and line guide -3- .
Carefully guide underbody section of the supply line out of the front wheel housing and remove it. Make sure not to kink the supply line while doing this.