Removing Supply Line - Engine Compartment Section

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Highly inflammable or explosive materials

Danger of fire or explosion
1. → Avoid contact with hot parts or sources of ignition.
2. → Use suction to remove ignitable vapours.
3. → Attach warning sign in a clearly visible position.
4. → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
5. → Secure collection containers/vessels to prevent them from tipping over.

WARNING: Toxic substances

Danger of poisoning or suffocation
Danger of burns to the eyes and skin
1. → Ventilate the work area well.
2. → Never ingest or inhale.
3. → Read specific information on the Hazard Sheet.
4. → Wear personal protective gear.
5. → Do not smoke, eat or drink in the work area.

Remove engine compartment section -1- of the supply line.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Supply line - engine compartment section
1. 1.1 Release and disconnect quick connector on engine compartment section at the underbody section -2- .
2. 1.2 Soak up escaping fuel using suitable aids and close off line connections using suitable stoppers.
3. 1.3 Loosen spring band clamp -3- using > VAS 6890 - spring band clamps pliers.
4. 1.4 Pull engine compartment section -1- off the high-pressure pump section -4- .
5. 1.5 Soak up escaping fuel using suitable aids and close off line connections using suitable stoppers.
6. 1.6 Unclip supply line -1- from clips -5- and remove it.